Quick couple questions about glute injections

[Ltrevino]

On my 5th week so far test cyp. 400ml a week.. been rotating to left cheek and right cheek each pin.. last couple pins some oil has been coming out. I'm using a 22g 1in pin.
Guess my questions are am I not going deep enough? And if I don't go deep enough the oil isn't being wasted right because it's still in my body? All the up to the 5th week I've seen no oil and pins are going well like I said last two I've seen oil and just wanna make sure if I'm not going deep the pin isn't being wasted. Thanks guys

 

[rockmfhudd]

leave it in for a few more seconds after you get to the end of the plunger. some oil may come out which could be normal and you are still getting enuff in your system

 

[Ltrevino]

I am z tracking.. and I have some running down when I pull out.. just real concern for me is if I'm not going deep enough is the whole pin wasted or reguardless of how deep is it still being in my system

 

[Ltrevino]

Also I'm doing a dg pin

 

[Ltrevino]

Most likely you're absorbing most of it, you aren't feeling any oil embolisms I presume. It's not uncommon to have some back pressure of oil, especially in certain injection locations.

Also going to a 25g instead of a 22g means a smaller hole. Holding it at injection location for a little longer after finish injection. Applying pressure to injection location can all help.

Not sure what oil embolism is.. so I should maybe go with a smaller gauge? I just want to make sure I'm absorbing it since I may not be going deep enough but it's been fine till last two pins