Test pip

[teku135]

Has anyone used test e or c 300mg/ml? will it cause pip or lumps?

 

[Jake]

Has anyone used test e or c 300mg/ml? will it cause pip or lumps?

It might. 300 is only the beginning point of test being too high, so if the brewer is skilled it will be ok. Otherwise you will just have to pull 1cc and then 1cc deca 200 with it.

 

[Guarionex]

Has anyone used test e or c 300mg/ml? will it cause pip or lumps?

It might. As Jake explained, 300mg/ml is when test concentration leans towards high end. Split the dose for twice a week, and warm the syringe with the oil in warm water. That might alleviate the pip.

 

[teku135]

well i was going to do a basic test cycle 250mg per week and i saw that the new sponsor has 300 mg/ml also. Pharmacom labs, they have a good reputation, but i wanted to ask first.

 

[Taurus]

Mixing it with a little EQ will smooth it out also

 

[Jake]

here is how you figure it out and learn to know yourself. Use all sterile technique and then inject 1cc.We cannot tell you if you are going to get pip or not, and if you do ..it goes away in a few days and you won't die or have to go to the ER.You just tough it out.

 

[RickRock]

As long as it's a reputable lab, 300mg per ml should be no big deal. I've used that concentration many times and never had an issue with various labs. However, that's the highest concentration I would ever accept with anyone's test. In my opinion 200-250mg per ml is ideal.


(PM me for a price list for Biotech Labs and 10% discount)

 

[TX TERROR]

Shouldn't cause pip. May cause some swelling but in my experience there should not be pain.

Sent from my SM-N910T using Tapatalk

 

[DylanGemelli]

300 should be fine... pharmacomm makes a very strong product so my assumption would be that its just fine... once you get in that 400 range, thats when you can start really worrying about the pip with it...