Cutting Test Cyp with sterile oil.

[MarkD]

I have a few vials of test cyp from a batch that left a little bite. I think the BA levels are too high. My cousin suggested I cut it with sterile oil such as grape seed. Per mL what should I cut this with and where is the best place for oil? Thanks brothers.

 

[FL1025]

Yea I've had to do that with some sust and GSO I had a while back. The pip was almost debilitating. The source I used to use for oil isn't around anymore.

 

[JackSteel]

I have a few vials of test cyp from a batch that left a little bite. I think the BA levels are too high. My cousin suggested I cut it with sterile oil such as grape seed. Per mL what should I cut this with and where is the best place for oil? Thanks brothers.

Or EQ if you have any. Depends which is cheaper. At least that's been done by the old school BBers in the past I've read


Sent from my iPhone using Tapatalk

Www.expressdomesticapache.com

[email protected]

 

[MarkD]

Or EQ if you have any. Depends which is cheaper. At least that's been done by the old school BBers in the past I've read


Sent from my iPhone using Tapatalk

Www.expressdomesticapache.com

[email protected]

How about Masteron E? I have heard of that as a carrier before.

 

[PHURIOUS]

I have a few vials of test cyp from a batch that left a little bite. I think the BA levels are too high. My cousin suggested I cut it with sterile oil such as grape seed. Per mL what should I cut this with and where is the best place for oil? Thanks brothers.

Why does everyone always think ba causes pip. Lol it doesnt. Have any of u ever injected straight ba? It feels like nothing.

Pip comes from the concentration of test. The tate at which it breaksdown and absorbs. Injection technique etc. not ba.

Yes u can cut it with oil. But you will have to buy some gso. A filter and something to put the oil in like a sealed vial


PHURIOUS

 

[MarkD]

Why does everyone always think ba causes pip. Lol it doesnt. Have any of u ever injected straight ba? It feels like nothing.

Pip comes from the concentration of test. The tate at which it breaksdown and absorbs. Injection technique etc. not ba.

Yes u can cut it with oil. But you will have to buy some gso. A filter and something to put the oil in like a sealed vial


PHURIOUS

Ah interesting. I dont know much about brewing, I was going off what a few people had said may be the issue.

 

[PHURIOUS]

If anything super high bb can cause a bite but cyp barely needs any.


PHURIOUS

 

[PHURIOUS]

But you will need a filter w media bottle attached the throw away kind a 60ml syringe and a 100ml sealed vial. Just fliter it and then back fill the syringe and inject into the vial. Then drawy what u need to cut it. Just remember when u cut it u lower the dosage as well


PHURIOUS

 

[PHURIOUS]

If u have it id just draw in some eq and some cyp. Mix it up good and shoot it that way


PHURIOUS

 

[RickRock]

If u have it id just draw in some eq and some cyp. Mix it up good and shoot it that way


PHURIOUS

This is exactly what I was going to say. I'd just dilute it in another oil that is pretty smooth with a lot of carrier room. EQ is perfect for that

 

[MarkD]

I have a sterile GSO 50ml is your want it bud

Pm me son.

 

[MarkD]

Any of you guys know what the cut ratio were be per cc or ml? I read it on Reddit but cant find the thread.

 

[MarkD]

Excellent. I was gonna try 1:1.

 

[MarkD]

Also, speaking of Reddit...some of those dudes are RECKLESS with their cycles.

 

[MarkD]

I would never. The Reddit link was actually to an old thread on either ASF or Elite Fitness. The ped and steroid subreddits are full of retards.